Nikon Forestry Pro Manuel D'utilisation page 27

【7】 Vertical separation (height between two points) mode
Operation/Results
7 Measurement with Vertical separation (height between two points) mode
Seeking your target
7-1
(Align the reticle with target)
Measurement
7-2 (Laser irradiate symbol is
displayed.)
7-3 Failure to measure
7-4 Measurement OK
Aiming (2nd target)
7-5 (Align the reticle with
target)
Measurement
7-6 (Laser irradiate symbol is
displayed)
7-7 Failure to measure
7-8 Measurement OK
9 Power off
Work
Vertical separation
(height between two points) (1st target)
Follow by 7-1
Repeat 7-1, 7-2, 7-3 until measurement is
complete.
Height of 1st target (from Horizontal)
Vertical separation (height between two
points) (2nd target)
(Result shown is the height of the 1st target)
Follow by 7-5
Repeat 7-5,7-6 and 7-7 until measurement
is complete
Vertical separation
(height between two points)
After 2 seconds, move to7-1
Regardless of process, after 30 seconds
since your last operation, power turns off.
Button Display
Elevation (˚) Depression (˚)
blinks
POWER
blinks
blinks
blinks
POWER
blinks
30 seconds
without
operation
Display examples
meter yards feet
15.2 16.6 50.0
15.2 16.6 50.0
21.4 23.4
En
De
Fr
Es
It
Ru
No
Se
Fi
Nl
Dk
Ro
Pl
Hu
Cz
27