Internal Display; Target Priority Mode; Distance Display Units - Nikon Coolshot 40 Manuel D'utilisation

5. Internal display

En
Es
Fr
Pt
: Aim at the target you want to measure.
Position the target at the center of the reticle.
: Now measuring
* Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.

6. Target priority mode

This Nikon Laser Rangefinder employs First Target
Priority mode.
When measuring overlapping subjects, it displays the
distance of the closest subject.
10
Distance
Target mark
Unit of measure (m/yd.)
Laser irradiation mark
Battery condition
: Appears while the laser is being irradiated for
a measurement.
Do not look towards the objective lens side
while this mark is shown.
: "Failure to measure" or "Unable to measure"

7. Distance display units

Measurement results are displayed in yards/meters.
(Factory default setting is yard.)
Yard [ ]
1. Turn on the power.
2. Press and hold the MODE button for more than two
seconds. After the display unit has switched, release
the button.
Meter
[ ]