Internal Display - Nikon MONARCH 7i VR Manuel D'utilisation

En ￭ Internal display
Es
Fr
Pt
Laser irradiation mark
Horizontal distance mode
First Target Priority mode
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
: "Failure to measure" or "Unable to measure"
*Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
10
All manuals and user guides at all-guides.com
VR (Vibration Reduction) function-employing
Distance
Do not look towards the objective lens side while this mark is shown.
model indication
Battery condition
Target mark
Unit of measure (m/yd.)
Distant Target Priority mode