Changing The Measurement Display Mode (F2) - Nikon MONARCH 7i VR Manuel D'utilisation

■ Changing the measurement display mode (F2 )
Horizontal distance mode and actual distance mode can be switched.
Factory default setting is horizontal distance mode.
1 . From standby, a long press (1 .5 seconds or more) of the MODE button, then a short
press (less than 1 .5 seconds) of the MODE button displays the setting menu of the
measurement display mode (F2 ).
2 . Short press (less than 1 .5 seconds) of the PWR button switches the measurement
display mode.
3 . After setting, a short press (less than 1 .5 seconds) of the MODE button displays the
setting menu for target priority mode (F3 ).
When setting is completed, a long press (1 .5 seconds or more) of the MODE button
or unoperated more than 8 seconds returns you to standby.
Displayed item differs according to the setting mode.
Horizontal distance mode
All manuals and user guides at all-guides.com
Horizontal
distance
Actual distance mode
N/A
N/A
En
Es
Fr
Pt
Actual
distance
15