Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
En
￭ Internal display
Fr
Laser irradiation mark
Target mark
Distance
Unit of measure (m/yd.)
Horizontal Distance mode
Distant Target Priority mode
First Target Priority mode
Battery condition
: Aim at the target you want to measure. Position the target at the center of the reticle.
: Appears while the laser is being irradiated for a measurement.
Do not look towards the objective lens side while this mark is shown.
: "Failure to measure" or "Unable to measure"
* Because the internal display of this product is enlarged by the eyepiece, dust may sometimes be seen.
This will not, however, affect the measurement accuracy.
10
Publicité
Chapitres
Table des Matières
