Troubleshooting/Repair - Nikon ARROW id 3000 Manuel D'utilisation

￭ Troubleshooting/Repair
En
Fr
If the Nikon Laser Rangefinder fails to function as expected, check the list below before consulting
your local dealer or the store where you purchased it.
● If there is a problem with the product.
Problem
・Does not turn on
・Unable to measure
・Anomalous result
● If you require a repair, please contact your local dealer or the store where you purchased the product.
Do not repair or disassemble. It may result in a serious incident.
Please note that Nikon is not responsible for any direct or indirect damage if the user attempts repair
or disassembly.
18
・Press the PWR button (top of the body).
・Check battery is inserted correctly.
・Replace the battery with a new one.
・Confirm each mode setting.
・Confirm if it can measure a large target close to you (example: a building
approx. 15m/yd. ahead of you).
・Clean the lens surface if necessary.
Cause/Solution