Troubleshooting/Repair - Nikon Coolshot 40 Manuel D'utilisation

11. Troubleshooting/Repair

If the Nikon Laser Rangefinder fails to function as expected, check the list before consulting your local
En
dealer or the store where you purchased it.
Es
Fr
￭ If there is a problem with the product.
Pt
Problem
・Does not turn on
・Unable to measure
・Anomalous result
￭ If you require a repair, please contact your local dealer or the store where you purchased the product.
Do not repair or disassemble. It may result in a serious incident.
Please note that Nikon is not responsible for any direct or indirect damage if the user attempts repair or
disassembly.
16
・Press POWER ON/Measurement button (near side, top of the body)
・Check battery insertion
・Replace the battery with a new one
・Confirm each mode setting
・Confirm if it can measure a large target close to you (example: a
building approx. 15 m/yd. ahead of you)
・Clean the lens surface if necessary
Cause/Solution