Activating / Quitting The Tp Menu; Switching Tp On / Off - JVC KD-NX10 Manuel D'instructions

Radio operation
Direct programming enables a TP sta-
tion to be programmed that is not the FM
station being received. This means, for
example, that a particular FM station can
be listened to whilst TP announcements
are received from another one.
If the programmed TP station reception
is poor, the unit switches to automatic
tracking until the programmed TP sta-
tion can be restored.
If the unit detects a TP station, this is in-
dicated on the display by
TP
appears on the display to indicate
that the traffic programme is active.
156
Activating / quitting the TP
menu
Activating:
Press the
nouncements cannot be transmitted).
Press the
Quitting:
.
Press the
the TP menu will automatically disap-
pear after 8 seconds if no further oper-
ations are performed.

Switching TP on / off

In all modes and wavebands, TP can be
turned on or off by pressing and holding
the button
onds.
TP can also be switched on or off whilst
in the TP menu:
Switching on:
Switching on TP menu.
button (traffic an-
Press multifunction button
peatedly until
Switching off:
multifunction button.
Switching on TP menu.
button; otherwise,
Press multifunction button
peatedly until
TP is switched off after returning to nor-
mal display.
for more than 2 sec-
re-
appears.
TP on
re-
TP off appears.