Anti-Theft System; Entering The Code Number - JVC KD-NX10 Manuel D'instructions

Anti-theft system

Entering the code number

Anti-theft device
If the car radio is disconnected from the
electrical supply source, the anti-theft
device prevents it from being reconnect-
ed. After turning on the unit via the
button, the prompt
is displayed.
Code Number
Use the multifunction buttons
to enter the five-digit code
number.
Example:
Code number 15372 (the code number
can be found on the enclosed CODE
CARD).
The unit automatically switches on
when the fifth digit is entered and all
other digits were entered correctly.
112
Note:
It is important to store the CODE
CARD in a safe place outside of the ve-
hicle. This will prevent unauthorised
use. The window stickers provided
should be attached to the windscreen/
Enter
windows inside your vehicle.
If an incorrect code number is entered,
the prompt
Enter
will be displayed once again. If an incor-
rect code number is entered three times
-
in a row, the unit will display
it will be blocked for approximately 60
minutes.
Three further incorrect entries block the
unit for another 60 minutes.
Attention:
The waiting time elapses only when the
ignition and unit are switched on.
Code Number
, and
Wait