Switching Radio Text On / Off; Traffic Programme (Tp) - JVC KD-NX10 Manuel D'instructions

Switching radio text on / off

G
Warning
Accident hazard
Since information transmitted via radio
text is constantly changing, we recom-
mend displaying the radio text only
when the vehicle is stationary to avoid
unnecessary distraction for the driver.
This is a necessary precaution for acci-
dent prevention.
Selecting FM radio menu mode.
Press multifunction button
switch on the radio text.
The car radio filters data transmitted by
the radio station and displays it in the
form of radio text.
Note:
Radio text cannot be displayed unless
the selected station also transmits radio
text.
Poor reception or interference may dis-
tort the radio text or prevent it from be-
ing displayed completely.
In order to quit the radio text level,
press the button.
to
Radio operation

Traffic programme (TP)

If an RDS Diversity station broadcasts
TP announcements, it is possible to in-
terrupt CD, MP3/WMA, CDC/AUX,
MW, LW, SW play or the mute mode
and to switch to the TP announcements.
Moreover, you can listen to one FM sta-
tion while receiving TP announcements
transmitted by another FM station.
There are two ways to select a TP sta-
tion:
- Automatic tracking
- Direct programming
Automatic tracking transmits TP bulle-
tins over the FM station currently being
received. If the selected FM station has
poor signal quality or cannot function as
a TP station, the unit applies specified
criteria to search for a new TP station.
155