Entering The Destination Road - JVC KD-NX10 Manuel D'instructions

Entering the destination road

Select ROAD with the right rotary
control and press the control to
confirm.
Select the letters one after another by
turning the right rotary control
press to confirm. The selected letter
appears enlarged at the right of the dis-
play.
Use multifunction button
the last confirmed letter.
The complete entry can be deleted by
pressing multifunction button
more than 2 seconds.
Already entered letters are displayed in-
versely. To help, the road name most
similar to the entry so far is displayed.
The unit offers only the possible remain-
ing letters for selection.
If no other entries are available, the unit
completes the road-name.
To accept the entry, press and hold the
right rotary control
2 seconds or select the small tick
and
and briefly press the right rotary
control .
If the road name was entered completely
or automatically completed, the program
to delete
switches to either the road-distinguish-
ing list (same road name exists more
than once in the location selected) or re-
for
turns to the Route menu.
If an incomplete location entry was con-
firmed, the road selection list is dis-
played.
Navigation operation
The road name most similar to the entry
appears in capital letters in the road se-
lection list.
The scroll marks indicate that other
roads, sorted in alphabetical order, can
be selected.
Select the road by turning the right ro-
tary control
for more than confirm.
If a definite entry is given, the program
returns to the Route menu.
If an entry is unclear (same road exists
more than once in the same location), the
road distinguishing list is shown.
Select the required part of town using
the right rotary control
the control to confirm.
Program switches to the Route menu.
and press the control to
and press
123