Setting Time; Saving Position - JVC KD-NX10 Manuel D'instructions

Navigation operation

Setting time

In order to achieve correct navigation on
routes with time-dependent traffic guid-
ance, and to calculate the estimated time
of arrival, it is necessary to set the GMT
time transmitted from satellites to the
current time zone.
In the System Settings menu, select
TIME and confirm.
With multifunction button
, the time can be changed from
24- to 12-hour display.
With the multifunction buttons
or , the time will be changed in
half-hour increments.
144
By pressing the right rotary control
or multifunction button
time is accepted.
The program returns to the System Set-
tings menu.
or

Saving position

, the set
Set and confirm
the System Settings menu.
The display will show the co-ordinates
(latitude/ longitude) for the current posi-
tion.
Confirm by pressing the right rotary
control .
Entering a Name for Position.
Press the right rotary control
more than 2 seconds to confirm the
name entered.
or
Highlight the small tick
press the right rotary control
in
SAVE POSITION
for
and briefly
.