Setting The Time For Dimmer; More About This Unit - JVC KW-XR811 Manuel D'instructions

Setting the time for dimmer

You can set the start/end time for dimmer.
1
[Hold]
2
] <Display> ] <Dimmer> ]
<Time Set>

More about this unit

Basic operations
General
• If you turn off the power while listening to
a track, playback will start from where it had
been stopped previously next time you turn
on the power.
• If no operation is done for about 60 seconds
after pressing MENU button, the operation will
be canceled.
Tuner operations
Storing stations in memory
• During SSM search...
– All previously stored stations are erased and
the stations are stored anew.
– When SSM is over, the station stored in the
lowest preset number will be automatically
tuned in.
• When storing a station manually, the
previously preset station is erased when
a new station is stored in the same preset
number.
3
] Adjust the dimmer start time.
4
] Adjust the dimmer end time.
5
] Exit from the setting.
FM Radio Data System operations
• Network-Tracking Reception requires two
types of Radio Data System signals—PI
(Programme Identification) and AF
(Alternative Frequency) to work correctly.
• If a Traffic Announcement is received by
TA Standby Reception, the volume level
automatically changes to the preset level
(TA Volume) if the current level is lower than
the preset level.
• When Alternative Frequency Reception is
activated (with AF selected), Network-Tracking
Reception is also activated automatically.
ENGLISH 35