Listening To The Usb Device - JVC KW-XR811 Manuel D'instructions

Listening to the USB device

This unit is equipped with two USB input terminals (on the control panel and USB cable from the
rear of the unit). You can use these two terminals at the same time.
• You can also connect a USB Bluetooth Adapter, KS-UBT1 (supplied), (
iPod/iPhone ( 23) to the USB input terminal(s).
This unit can play MP3/WMA/WAV tracks stored in a USB mass storage class device (such
as a USB memory, Digital Audio Player, etc.).
~
Ÿ
USB cable from the
rear of the unit
All tracks will be played repeatedly until you change the source or detach the USB
device.
If you have turned off the power (without
detaching the USB device)...
Pressing SOURCE turns on the power and
playback starts from where it has been stopped
previously.
• If a different USB device is currently attached,
playback starts from the beginning.
] Turn on the power.
USB input terminal
– – – – – – – – and / or – – – – – – – –
USB memory
Stopping playback and detaching
the USB device
Straightly pull it out from the unit.
"No USB" appears. Press SOURCE to listen to
another playback source.
15) and/or an Apple
ENGLISH 13