JVC KW-XR811 Manuel D'instructions page 22

Setting item
Phonebook
Trans
Phonebook
1
Select *
Initialize
Information
1
* Selectable only when the connected phone supports PBAP.
2
* Displayed only when a Bluetooth phone/audio player is connected.
Warning messages
Connection Error
The device is registered but the connection has failed. Use <Connect Phone / Connect Audio>
to connect the device again. (
Error
Try the operation again. If "Error" appears again, check if the device supports the function you
have tried.
Please Wait...
The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off
and turn on the unit, then connect the device again (or reset the unit).
Please Reset...
Reset the unit and try the operation again. If "Please Reset..." appears again, consult your nearest
JVC IN-CAR ENTERTAINMENT dealers.
Bluetooth Information:
If you wish to receive more information about Bluetooth, visit the following JVC web site:
<http://www.jvc.co.jp/english/car/> (English website only)
22 ENGLISH
Selectable setting, [
— : You can copy the phonebook memory of a mobile phone into
the unit (via OPP).
Enter the PIN code to the unit to transfer the phonebook into
the unit. You can transfer a maximum of 400 numbers.
• In Phone : The unit browses the phonebook of the connected phone.
• In Unit : The unit browses the phonebook registered in the unit.
• Yes : Initialize all the Bluetooth settings (including stored pairing,
phonebook, and etc.).
• No : Cancels.
• My BT Name
• My Address
• BT Software Ver
2
• Connected Phone *
2
• Connected Audio *
17)
Initial: Underlined
: Shows the unit name.
: Shows address of USB Bluetooth Adapter.
: Shows the software version.
: Shows connected phone name.
: Shows connected audio device name.
]