Influencing The Calculation Of Eta; Switching The Speed Limits Display - JVC KD-NX10 Manuel D'instructions

Influencing the calculation of
ETA
Set and confirm ETA CALCULA-
in the System Settings menu.
TION
ETA stands for Estimated Time of Ar-
rival.
Use the right rotary control
lect the desired setting.
• SPORTY
With this setting the unit adjusts ETA
for faster drivers. An earlier ETA is
calculated.
• NORMAL
This is the default setting. It offers a
sufficiently accurate calculation of
ETA for most drivers.
• LOW-RISK
With this setting the unit adjusts for
drivers who may take longer for the
planned journey. This setting could be
used, for example, in areas of dense
traffic.
The selection is accepted by pressing
the right rotary control
The system returns to the System Set-
tings menu.
to se-
Navigation operation
Switching the speed limits
display on/off
If the speed limits display is ON, the sys-
tem will inform you of the maximum
permissible speed limit for the route
along which you are travelling during
route guidance, insofar as this informa-
tion is available.
.
G G
Warning
Accident hazard
Road traffic regulations always take
priority when a vehicle is being driven
in traffic. Road signs en-route should
always be heeded. In some cases, the
speed limit indicated by the navigation
system may be incorrect. At all times,
the driver must decide whether or not to
heed the speed limit indicated. We do
not accept liability for erroneous data
provided by the navigation system.
147