Aux Input (Aux); Display Compass (Cmp); Signal Tone Volume (Bev) - JVC KD-NX10 Manuel D'instructions

PSM (Preferred Setting Mode) menu

AUX input (Aux)

This can be used to switch on the CD
changer AF connections if no CD chang-
er is connected. An external unit (such as
MD player) can then be connected.
To set, call up PSM menu.
By pressing multifunction button
, call up the 2nd level of the PSM
menu.
With multifunction button
lect either AUX Mode
Aux Mode off (Off).
The setting is stored automatically.
In CD mode, multifunction button
must be pressed to select AUX mode.
176

Display compass (Cmp)

When the navigation is not active, it is
possible to have a compass and the cur-
rent time shown on the right side of the
display.
To set, call up PSM menu.
By pressing multifunction button
, call up the 2nd level of the PSM
menu.
, se- With multifunction button
on (On) or lect either Show compass
is displayed) or
(compass is not displayed).
If the compass display is switched off
and navigation is not currently active,
radio station abbreviations can be as-
signed to 9 multifunction buttons in FM-
DAS mode.
The setting is stored automatically.

Signal tone volume (BeV)

The volume of signal tones (e.g. storage
confirmation) can be set using this func-
tion.
To set, call up PSM menu.
By pressing multifunction button
menu.
Press the
, se- With the right rotary control
(compass between
Hide compass
The setting is stored automatically.
, call up the 2nd level of the PSM
multifunction button.
, select
0 (Low) or +5 (Loud).