Hillrom Yellofins Apex Mode D'emploi page 36

INSTRUCTIONS FOR USE
6. Install the stirrup pad on to the toe of the stirrup boot and push
the heel of the stirrup pad in to the heel of the stirrup boot.
7. Make sure that the toe is fully installed on the stirrup boot.
8. Put the heel flap around the stirrup boot.
9. Attach the button-hole fastener on to the hook.
10. Install the button-hole fastener on the other side of the boot.
Refer to Step 8 and Step 9 above.
Document Number: 80025141
Version G
Page 36
Issue Date: 26 November 2020
Ref Blank Template: 80025117 Ver. F