Hillrom Yellofins Apex Mode D'emploi page 33

INSTRUCTIONS FOR USE
Install the Strap:
WARNING:
Make sure that each strap is correctly secured. Make sure that the formed button
is fully through the slot in the stirrup boot. Make sure that the formed button faces
away from the stirrup pad. Patient or caregiver injury or equipment damage can
occur.
1. Put the ball-and-slit fastener end of the strap into the slot in the
stirrup boot. Make sure that the formed button faces away
from the stirrup pad.
2. Pull the strap through the slot in the stirrup boot. Make sure that
the formed button is fully through the slot in the stirrup boot.
3. Pull the formed button through the slot in the stirrup boot.
4. Do not install the strap with the formed button towards the
stirrup pad.
Document Number: 80025141
Version G
Page 33
Issue Date: 26 November 2020
Ref Blank Template: 80025117 Ver. F