Hillrom Yellofins Apex Mode D'emploi page 35

INSTRUCTIONS FOR USE
1. Identify the corresponding sections of the stirrup pad and the
stirrup boot. Make sure that you are not trying to install a left
pad on a right boot or a right pad on a left boot.
2. Put the stirrup pad on the lateral (longer) peak of the stirrup
boot.
3. Pull the stirrup pad on to the stirrup boot so that it is partially
installed on the lateral peak.
4. Put the calf section of the stirrup pad on the stirrup boot and
pull the pad towards the heel of the boot.
5. Make sure that the lateral peak and calf section are both fully
installed on the stirrup boot.
Document Number: 80025141
Version G
Page 35
Issue Date: 26 November 2020
Ref Blank Template: 80025117 Ver. F