Spark Plug Replacement; Storing The Product - Ryobi RBC430SES Manuel D'utilisation

EN
FR DE ES
Remove the air filter cover by pushing down on the
Q
latch with your thumb while gently pulling on the
cover.
Brush the air filter screen lightly to clean.
Q
Replace the air filter cover by inserting the tabs on
Q
the bottom of the cover into the slots on the air filter
base; push the cover up until it latches securely in
place.
FUEL CAP
WARNING:
A leaking fuel cap is a fire hazard and must be
replaced immediately.
CE
The fuel cap contains a non-serviceable filter and a
check valve. A clogged fuel filter will cause poor engine
performance. If performance improves when the fuel cap
is loosened, check valve may be faulty or filter clogged.
Replace fuel cap if required.

SPARK PLUG REPLACEMENT

See Figure 21. for RBC430SBS
See Figure 20. for RBC430SES
This engine uses a Champion RY4C or NGK CMR7A
spark plug with 0.6mm electrode gap. Use an exact
replacement and replace annually.

STORING THE PRODUCT

Clean all foreign material from the product. Store
Q
idle unit indoors in a dry, well-ventilated area that is
inaccessible to children. Keep away from corrosive
agents such as garden chemicals.
When storing 1 month or longer:
Drain all fuel from tank into a container approved for
Q
petrol. Run engine until it stops.
IT PT NL SV DA NO FI HU CS RU
English
28
RO PL SL HR ET LT LV SK BG