Intended Use; General Safety Rules - Ryobi RBC430SES Manuel D'utilisation

EN
FR DE ES
WARNING: To reduce the risk of injury, the user
must read and understand the operator's manual
before using this product.
SAVE THIS MANUAL FOR FUTURE
REFERENCE
Yo u r b r u s h c u t t e r h a s b e e n e n g i n e e r e d a n d
manufactured to our high standard for dependability,
ease of operation, and operator safety. Properly
cared for, it will give you years of rugged, trouble-free
performance.

INTENDED USE

This product is only intended for use outdoors in a well
ventilated area.
The product is intended for cutting long grass, weed and
similar vegetation at or about ground level. The cutting
plane should be approximately parallel to the ground
surface. The product should not be used to cut or trim
hedges, bushes or other vegetation where the cutting
plane is not parallel to the ground surface.

GENERAL SAFETY RULES

WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in
serious personal injury.
READ ALL INSTRUCTIONS
For safe operation, read and understand all
Q
instructions before using this product. Follow
all safety instructions. Failure to follow all safety
instructions listed below can result in serious
personal injury.
Do not allow children or untrained individuals to use
Q
this unit.
Never start or run the engine in a closed or poorly
Q
ventilated area; breathing exhaust fumes can kill.
Clear the work area before each use. Remove all
Q
objects such as rocks, broken glass, nails, wire, or
string which can be thrown or become entangled in
the cutting line or blade.
Wear hearing protectors, safety glasses or goggles
Q
that are marked to comply with EN 166 standard
when operating this product.
Wear heavy, long trousers, boots, and gloves. Do
Q
not wear loose fitting clothing, shorts, sandals, or go
barefoot. Do not wear jewellery of any kind.
Heavy protective clothing may increase operator
Q
fatigue, which could lead to heat stroke. During
IT PT NL SV DA NO FI HU CS RU
English
weather that is hot and humid, heavy work should be
scheduled for early morning or late afternoon hours
when temperatures are cooler.
In case of risk falling objects, the wearing head
Q
protection is advised.
Never operate this unit on the operator's left side.
Q
Secure long hair above shoulder level to prevent
Q
entanglement in moving parts.
It has been reported that vibrations from hand-held
Q
tools may contribute to a condition called Raynaud's
Syndrome in certain individuals. Symptoms may
include tingling, numbness and blanching of the
fingers, usually apparent upon exposure to cold.
Hereditary factors, exposure to cold and dampness,
diet, smoking and work practices are all thought to
contribute to the development of these symptoms. It
is presently unknown what, if any, vibrations or extent
of exposure may contribute to the condition. There
are measures that can be taken by the operator to
possibly reduce the effects of vibration:
a) Keep your body warm in cold weather. When
operating the unit wear gloves to keep the hands
and wrists warm. It is reported that cold weather is a
major factor contributing to Raynaud's Syndrome.
b) After each period of operation, exercise to increase
blood circulation.
c) Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this
condition, immediately discontinue use and see your
physician about these symptoms.
Keep all bystanders, children, and pets at least 15m
Q
away. Bystanders should be encouraged to wear eye
protection. If you are approached, stop the engine
and cutting attachment. In the case of bladed units,
there is the added risk of injury to bystanders from
being struck with the moving blade in the event of a
blade thrust or other unexpected reaction of the tool.
Do not operate this unit when you are tired, ill, or
Q
under the influence of alcohol, drugs, or medication.
Do not operate in poor lighting.
Q
Keep firm footing and balance. Do not overreach.
Q
Overreaching can result in loss of balance or
exposure to hot surfaces.
Keep all parts of your body away from any moving
Q
part.
To avoid hot surfaces, never operate the unit with the
Q
bottom of the engine above waist level.
Do not touch area around the silencer or engine of
Q
the unit, these parts get very hot during operation.
Always stop the engine and remove the spark plug
Q
lead before making any adjustments or repairs
except for carburettor adjustments.
Inspect the unit before each use for loose fasteners,
Q
16
RO PL SL HR ET LT LV SK BG