Belkin N1 VISION Mode D'emploi page 9

Product Overview
Integrated 10/100/1000 4-Port Switch – The N1 Vision has a built-
in, four-port network switch to allow your wired computers to share
printers, data and MP3 files, digital photos, and much more. The switch
features automatic detection so it will adjust to the speed of connected
devices. The switch will transfer data between computers and the
Internet simultaneously without interrupting or consuming resources.
Universal Plug and Play (UPnP) – UPnP is a technology that
offers seamless operation of voice messaging, video messaging,
games, and other applications that are UPnP-compliant.
Support for VPN Pass-Through – If you connect to your
office network from home using a VPN connection, your
N1 Vision will allow your VPN-equipped computer to pass
through the N1 Vision and to your office network.
Built-In Dynamic Host Configuration Protocol (DHCP) – Built-
In Dynamic Host Configuration Protocol (DHCP) on-board makes
for the easiest possible connection of a network. The DHCP
server will assign IP addresses to each computer automatically
so there is no need for a complicated networking setup.
Belkin Troubleshooting Assistant CD – The Troubleshooting Assistant
software takes the guesswork out of setting up your N1 Vision. This
software automatically determines your network settings for you and
sets up the N1 Vision for connection to your ISP. In a matter of minutes,
your N1 Vision will be up and you will be surfing the Internet.
Note: Troubleshooting Assistant software is compatible with Windows
2000, XP, and Vista; and Mac OS X v10.4. If you are using another operating
system, the N1 Vision can be set up using the Alternate Setup Method
described in this User Manual (see page 30).
7
1
2
3
4
5
6
7
8
9
10