Belkin N1 VISION Mode D'emploi page 68

Using the Web-Based
Advanced User Interface
Setting Client IP Filters
The N1 Vision can be configured to restrict access to the Internet, e-mail, or other
network services at specific days and times. Restriction can be set for a single
computer, a range of computers, or multiple computers.
To restrict Internet access to a single computer for example, enter the IP address
of the computer you wish to restrict access to in the IP fields (1). Next, enter "80"
in both the port fields (2). Select "Both" (3). Select "Block" (4). You can also select
"Always" to block access all of the time. Select the day to start on top (5), the time
to start on top (6), the day to end on the bottom (7), and the time to stop (8) on
the bottom. Select "Enable" (9). Click "Apply Changes". The computer at the IP
address you specified will now be blocked from Internet access at the times you
specified. Note: Be sure you have selected the correct time zone under "Utilities>
System Settings> Time Zone".
(1) (2) (3) (4)
66
(5) (6)
(7) (8) (9)