Belkin N1 VISION Mode D'emploi page 21

Connecting and Configuring your N1 Vision
1. Internet Connection – This icon shows you when
the N1 Vision is connected to the Internet.
OFF
Solid White
Blinking White
2. Modem Connection – This icon shows you when
the N1 Vision is connected to the modem.
OFF
Solid White
Blinking White
3. N1 Vision (Router) Wireless State – This icon
indicates whether or not wireless is enabled.
N1 Vision showing wireless
connection (with curved-lines
illustration)
N1 Vision showing wired
connection (without curved-lines
illustration)
4. Wired Computers – This icon indicates if there
are any wired connections present.
OFF
Solid White
No Internet connection has been detected
N1 Vision is connected to the Internet
Internet connection was detected; N1
Vision is not currently able to connect to the
Internet
Not connected to a modem
N1 Vision is connected to modem and
functioning properly
Problem with modem (such as boot failure,
etc.)
N1 Vision is ON with wireless
enabled and ready for use with
wireless and wired devices
N1 Vision is ON with wireless
disabled and ready for use with
only wired devices
Wired device not present
Wired device(s) connected to the N1 Vision
19
1
2
3
4
5
6
7
8
9
10