Belkin N1 VISION Mode D'emploi page 45

Alternate Setup Method
4. User Decide Login Server Manually – If your login server IP
address is not available in the "Select Your State" drop-down
menu (1), you may manually enter the login server IP address
by placing a check in the box next to "User decide login server
manually" and type in the address next to "Login Server" (5).
Setting Custom Domain Name Server (DNS) Settings
A "Domain Name Server" is a server located on the Internet that translates
Universal Resource Locaters (URLs) like "www.belkin.com" to IP addresses.
Many Internet Service Providers (ISPs) do not require you to enter this
information into the N1 Vision. The "Automatic from ISP" box (1) should be
checked if your ISP did not give you a specific DNS address. If you are using a
static IP connection type, then you may need to enter a specific DNS address
and secondary DNS address for your connection to work properly. If your
connection type is dynamic or PPPoE, it is likely that you do not have to enter a
DNS address. Leave the "Automatic from ISP" box checked. To enter the DNS
address settings, uncheck the "Automatic from ISP" box and enter your DNS
entries in the spaces provided. Click "Apply Changes" (2) to save the settings.
(1)
(2)
43
1
2
3
4
5
6
7
8
9
10