Belkin N1 VISION Mode D'emploi page 43

Alternate Setup Method
6. My Subnet Mask – Provided by your ISP. Enter the IP address here.
7. Connection ID (optional) – Provided by your ISP. If your
ISP did not give you a connection ID, leave this blank.
8. Disconnect after X.... – The "Disconnect" feature is used to
automatically disconnect the N1 Vision from your ISP when there
is no activity for a specified period of time. For instance, placing
a check mark next to this option and entering "5" into the minute
field will cause the N1 Vision to disconnect from the Internet
after five minutes of no Internet activity. This option should be
used if you pay for your Internet service by the minute.
41
1
2
3
4
5
6
7
8
9
10