Product Overview; Product Features - Belkin N1 VISION Mode D'emploi

Product Overview

Product Features – In minutes you will be able to share your
Internet connection and network your computers. The following
is a list of features that make your new Belkin N1 Vision an
ideal solution for your home or small office network.
Works with Both PCs and Mac® Computers – The N1 Vision
supports a variety of networking environments including Mac
OS® X v10.4; Windows® 2000, XP, or VistaTM; and others. All
that is needed is an Internet browser and a network adapter that
supports TCP/IP (the standard language of the Internet).
Interactive Display – The interactive display on the front of the N1
Vision indicates which features are in operation. You'll know at-a-
glance whether your N1 Vision is connected to the Internet. This feature
eliminates the need for advanced software and status-monitoring
procedures typically needed through the use of a computer.
Web-Based Advanced User Interface – You can set up the N1 Vision's
advanced functions easily through your web browser, without having to
install additional software onto the computer. There are no disks to install
or keep track of and, best of all, you can make changes and perform
setup functions from any computer on the network quickly and easily.
NAT IP Address Sharing – Your N1 Vision employs Network Address
Translation (NAT) to share the single IP address assigned to you
by your Internet Service Provider (ISP) while saving the cost of
adding additional IP addresses to your Internet service account.
SPI Firewall – Your N1 Vision is equipped with a firewall that will protect
your network from a wide array of common hacker attacks including IP
Spoofing, Land Attack, Ping of Death (PoD), Denial of Service (DoS), IP
with zero length, Smurf Attack, TCP Null Scan, SYN flood, UDP flooding,
Tear Drop Attack, ICMP defect, RIP defect, and fragment flooding.
6