Belkin N1 VISION Mode D'emploi page 41

Alternate Setup Method
1. User Name – This space is provided to type in your
user name that was assigned by your ISP.
2. Password – Type in your password and retype it into
the "Retype Password" box to confirm it.
3. Service Name – A service name is rarely required by an ISP. If you
are not sure if your ISP requires a service name, leave this blank.
4. MTU – The MTU setting should never be changed unless your
ISP gives you a specific MTU setting. Making changes to the
MTU setting can cause problems with your Internet connection
including disconnection from the Internet, slow Internet access,
and problems with Internet applications working properly.
5. Disconnect after X... – The "Disconnect" feature is used to
automatically disconnect the N1 Vision from your ISP when there
is no activity for a specified period of time. For instance, placing
a check mark next to this option and entering "5" into the minute
field will cause the N1 Vision to disconnect from the Internet
after five minutes of no Internet activity. This option should be
used if you pay for your Internet service by the minute.
39
(1)
(2)
(3)
(4)
(5)
1
2
3
4
5
6
7
8
9
10