Belkin N1 VISION Mode D'emploi page 25

Connecting and Configuring your N1 Vision
Push Button Security – Select this
option if you would like to set up your
computers or devices using the Wi-Fi
Protected SetupTM (WPS) standard.
Using WPS is not a requirement
to connect to the N1 Vision.
To make a WPS connection, select the
"New Connection" option. To do so, you
must have WPS enabled on the computer
or device connecting to the N1 Vision. You
will need to push the WPS button in your
computer or device within two minutes.
B. Help and Tips – Select this option
for additional information.
C. Power Save – Select this option
to conserve the display's power or
if you prefer to turn off graphics.
When power save is ON, the display
will turn off within two minutes
after any user interaction.
23
1
2
3
4
5
6
7
8
9
10