Belkin N1 VISION Mode D'emploi page 29

Connecting and Configuring your N1 Vision
1.4 Requesting Internet Account
Info (if needed) – If your Internet
account requires a login and
password, you will be prompted
with a screen similar to the one
on the left. Select your country or
ISP from the drop-down boxes.
1.5 Configuring the N1 Vision – The
Troubleshooting Assistant will now
configure your N1 Vision by sending
data to the N1 Vision and restarting it.
Wait for the on-screen instructions.
Note: Do not disconnect any cable
or power off the N1 Vision while the
N1 Vision is rebooting. Doing so will
render your N1 Vision inoperable.
27
1
2
3
4
5
6
7
8
9
10