Connecting And Configuring Your N1 Vision - Belkin N1 VISION Mode D'emploi

Connecting and Configuring your N1 Vision

Verify the contents of your box. You should have the following:
• Belkin N1 Vision Wireless Router
• Quick Installation Guide
• Belkin Assistant CD with User Manual
• RJ45 Ethernet Networking Cable
• Power Supply
Modem Requirements – Your cable or DSL modem must be equipped with
an RJ45 Ethernet port. Many modems have both an RJ45 Ethernet port and a
USB connection. If you have a modem with both Ethernet and USB, and are
using the USB connection at this time, you will be instructed to use the RJ45
Ethernet port during the installation procedure. If your modem has only a USB
port, you can request a different type of modem from your ISP, or you can,
in some cases, purchase a modem that has an RJ45 Ethernet port on it.
Ethernet
14
USB