Setting Wpa Security - Belkin N1 VISION Mode D'emploi

Using the Web-Based
Advanced User Interface
IMPORTANT: Make sure your wireless computers are
updated to work with WPA2 and have the correct settings
to get proper connection to the N1 Vision.

Setting WPA Security

Note: To use WPA security, your wireless network cards must be equipped
with software that supports WPA. At the time this User Manual was
published, a security patch from Microsoft is available for free download.
This patch works only with Windows XP.
Your N1 Vision supports WPA-PSK (no server). WPA-PSK uses what is
known as a pre-shared key as the security key. A pre-shared key is basically
a password that is between eight and 39 characters long. It can be a
combination of letters, numbers, or characters. Each client uses the same
key to access the network. Typically this is the mode that will be used in a
home environment.
57
1
2
3
4
5
6
7
8
9
10