Setting Wep Encryption - Belkin N1 VISION Mode D'emploi

Using the Web-Based
Advanced User Interface

Setting WEP Encryption

Note to Mac users: The "Passphrase" option will not operate with Apple®
AirPort®. To configure encryption for your Mac computer, set the encryption
using the manual method described in the next section.
1. Select "128-bit WEP" or "64-bit WEP" from the drop-down menu.
2. After selecting your WEP encryption mode, you can enter your WEP key
manually by typing in the hex values in the space provided, or you can
type a passphrase in the "PassPhrase" field and click "Generate" to
create a WEP key from the passphrase. Click "Apply Changes" to finish.
You must now set all of your clients to match these settings.
3. Encryption in the N1 Vision is now set. Each of your computers on
your wireless network will now need to be configured with the same
passphrase. Refer to the documentation of your wireless network
adapter for information on making this change.
59
1
2
3
4
5
6
7
8
9
10