Ryobi RHT2660DA Manuel D'utilisation page 16

GB
F D E
USE EYE AND HEAR PROTECTION DEVICES.
■
ALWAYS REFUEL OUTDOORS. Never refuel indoors
■
or in a poorly ventilated area.
NEVER STORE THE MACHINE WITH FUEL IN THE
■
FUEL TANK INSIDE A BUILDING where ignition
sources are present, such as hot water and space
heaters, clothes dryers, and the like.
IF THE FUEL TANK HAS TO BE DRAINED, DO THIS
■
OUTDOORS.
TO REDUCE THE RISK OF FIRE AND BURN INJURY,
■
handle fuel with care. It is highly fl ammable.
DO NOT SMOKE WHILE HANDLING FUEL.
■
ADD FUEL BEFORE STARTING THE ENGINE. Never
■
remove the cap of the fuel tank or add fuel while the
engine is running or when the engine is hot.
LOOSEN FUEL CAP SLOWLY to release pressure and
■
to keep fuel from escaping around the cap.
REPLACE ALL FUEL TANK AND CONTAINER CAPS
■
SECURELY.
WIPE SPILLED FUEL FROM THE UNIT. Move 9m
■
away from refueling site before starting engine.
IF FUEL IS SPILLED, do not attempt to start the engine
■
but move the machine away from the area of spillage
and avoid creating any source of ignition until fuel vapors
have dissipated.
NEVER ATTEMPT TO BURN OFF SPILLED FUEL
■
UNDER ANY CIRCUMSTANCES.
BEFORE STORING, ALLOW THE ENGINE TO
■
COOL.
STORE FUEL IN A COOL, WELL-VENTILATED AREA,
■
safely away from spark and/or fl ame-producing equip-
ment.
STORE FUEL IN CONTAINERS specifi cally designed
■
for this purpose.
EMPTY FUEL TANK AND RESTRAIN THE UNIT
■
FROM MOVING before transporting in a vehicle.
WHEN SERVICING USE ONLY IDENTICAL RE-
■
PLACEMENT PARTS. Use of any other parts may
create a hazard or cause product damage.
MAKE SURE MINIMUM CLEARANCE of 1m is main-
■
tained from combustible materials.
SAVE THESE INSTRUCTIONS. Refer to them fre-
■
quently and use them to instruct other users. If you loan
someone this tool, loan them these instructions also.
Never operate the product without the safety guard in
■
place and in good condition.
Keep the working area free from wires, nails, metallic
■
I P NL S DK N FIN GR HU CZ RU
English
cable, glass, stones and debris.
Do not cut against hard objects, this could cause injury
■
or damage the trimmer.
Do not cross roads or gravel paths with the trimmer still
■
running.
As equipment user, you are responsible for third parties
■
in the working area.
While operating the tool, always hold it fi rmly with both
■
hands by the two handles and ensure a fi rm footing,
especially if steps or ladders are used. Don't touch the
blades!
Make sure you hold the tool fi rmly with both handles
■
and that you are well balanced with your weight evenly
distributed on both feet.
Keep the cutting system below level of your waist.
■
Keep your fi ngers and other body parts away from the
■
cutting blade.
Familiarise yourself with your surroundings and be on
■
the alert for possible hazards which you may not notice
because of the noise from the machine.
Never grasp the tool by the blade.
■
Large variation in temperature can lead to condensation
■
inside the tool. Before use, give the machine time to
adjust to the temperature of work area.
Let the tool work at its own pace. Do not overload.
■
Never attempt to use an incomplete machine or one
■
fi tted with an unauthorised modifi cation.
When transporting, disconnect the spark plug wire.
■
During transport or storage always cover the with the
■
scabbard.
Do not attempt to repair the machine unless you are
■
qualifi ed to do so.
Do not operate the machine with a damaged or exces-
■
sively worn cutting device.
To reduce fi re hazard keep engine and silencer free of
■
debris, leaves, or excessive lubricant.
Always ensure all handles are fi tted when using the
■
machine.
Know how to stop the machine quickly in an emer-
■
gency.
13 13
RO PL SLO HR TR EST LT
CAUTION:
Certain parts of the machine may become hot in
use.
LV SK BG