Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi page 56

Instructions for installation and use
● Make sure that no flammable objects have been placed on the
sauna heater before the sauna control unit is switched on.
● Make sure that no flammable objects have been placed on the
heater before activating the preset time function or the stand-by
mode for the remote start.
● Make sure that no flammable objects have been placed on or in front
of the infrared lamp before the sauna control unit is switched on.
● Make sure that no flammable objects have been placed on the
heater before activating the infrared lamp or the stand-by mode
for the remote start.
● For your own safety, consult your supplier in the event of prob-
lems that are not described in sufficient detail in the operating
instructions.
WORLD OF WELLNESS
p. 8/48