Starting The Fan - Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user
1. Turn the function selector 2 to position C (light).
► The light symbol lights up.
2. Use the intensity selector 3 to set the preferred light power.
3. Press the intensity selector 3.
► The light switches on.
► The intensity selector 3 lights up.
When the dimmer switch function is deactivated
When the dimmer function for the light has been deactivated, you can only switch
the light on and off. The light will always operate at full power.
1. Turn the function selector 2 to position C (light).
► The light symbol lights up.
► In the intensity display, "OFF" appears.
2. Press the intensity selector 3.
► The light switches on.
► The intensity selector 3 lights up.
► In the intensity display, "ON" appears.

10.6. Starting the fan

When the dimmer switch function is activated
When the dimmer switch function for the light is activated, the power for the fan
can be set to a scale of 0 to 100. At 0, the fan is switched off. 100 corresponds
to full power.
1. Turn the function selector 2 to position D (fan).
► The fan symbol lights up.
2. Use the intensity selector 3 to set the preferred power of the fan.
3. Press the intensity selector 3.
► The fan switches on.
► The intensity selector 3 lights up.
WORLD OF WELLNESS
p. 36/48