Starting The Sauna; Starting Additional Output - Sentiotec Pro C2 Instructions De Montage Et Mode D'emploi

Instructions for use for the user

10.3. Starting the sauna

1. Turn the function selector 2 to position A (temperature).
► The temperature symbol lights up.
2. Use the intensity selector 3 to set the preferred temperature.
3. Press the intensity selector 3.
► The sauna heater is switched on and begins to heat up.
► The intensity selector 3 lights up.
► Then the current temperature in the sauna room is displayed in the intensity
display 4. In single-sensor mode, the preset temperature is displayed.

10.4. Starting additional output

Infrared lamps, or infrared heat plates, for example, can be connected to the
additional output on the sauna control unit.
WARNING!
Risk of fire
Flammable objects that are placed on or in front of the infrared lamp
could ignite and cause fires.
● NEVER place flammable objects on or in front of the infrared lamp.
● Make sure that NO flammable objects have been placed on or in front
of the infrared lamp before you switch it on.
When the dimmer switch function is activated
When the dimmer switch function for the additional output is activated, the power
for the additional device can be set to a scale of 0 to 7. At 0, the additional device
is switched off. 7 corresponds to full power.
WORLD OF WELLNESS
p. 34/48