Dogtra 2500T Serie Mode D'emploi page 35

BUTTON FUNCTION
Beeper Volume Adjustment
The Beeper Volume level for the
Run/Point mode and Point-Only mode can be
increased or decreased by holding the
LOCATE button down while briefly pushing
the MODE button. The tone of the beeper can
be selected with a toggle switch located on
the face of the transmitter. There are two
beeper tones: High (H1 = lowest volume, H2
= medium volume, and H3 = highest volume)
and Low: (L1 = lowest volume, L2 = medium
volume, and L3 = highest volume).
Press Mode Once
(While holding down the
locate button)
Press Mode 2 nd Time
(While holding down the
locate button)
Press Mode 3 rd Time
(While holding down the
locate button)
NOTE : The Locate mode beeper volume
is not adjustable; it is always on the
highest level, L3 on Low tone, or H3 on
High tone.
66
Toggle Switch Toggle Switch
High Low
LCD Displays LCD Displays
H I L I
H 2 L 2
H 3 L 3
Transmitter Power ON/OFF
The button on the right side of the
transmitter is the "ON/OFF" button that
activates the transmitter only and LCD screen.
To turn the transmitter ON, press the
"ON/OFF" button on the right side of the
transmitter until the LCD screen illuminates.
To turn the transmitter OFF, press the
"ON/OFF" button on the right side of the
transmitter. When the LCD screen displays
"OFF" release the button.
BUTTON FUNCTION
67