Dogtra 2500T Serie Mode D'emploi page 31

DESCRIPTION OF TRANSMITTER PARTS
LCD Screen
The LCD screen indicates the stimulation
level on the screen ranging from (0-127). The
battery life indicator shows: 3 bars = full
charge, 2 bars = medium charge, and 1 bar =
needs charge.
When pressing the MODE button, the
selected beeper volume level is shown on the
LCD. (NOTE: Pressing the MODE button once
will also set the unit in the Run/Point mode.)
When the toggle switch is set on low tone the
LCD will read: L1= lowest volume, L2 =
medium volume and L3 = highest volume.
When the toggle switch is set on high tone, the
LCD will read: H1 = lowest volume, H2 =
medium volume and H3 = highest volume.
58
DESCRIPTION OF TRANSMITTER PARTS
Care for LCD Transmitters in Cold Temperature
In cold temperatures (10 degrees F or below),
the LCD on your transmitter may be dim or slow to
respond. Wait until the display becomes visible
before selecting any training level.
Even though the LCD screen might be dim or
slow to respond, when you push the Nick or
Constant button, the transmitter will still function
properly. In the occurrence of extremely cold
weather, the LCD screen might take a moment to
respond causing the Intensity level to freeze at that
current level. In this situation, if you turn the
Rheostat Intensity Dial, and the intensity level on the
screen does not increase, yet you emit an electrical
stimulation, the level will be in agreement with the
new changed intensity level.
In this situation, it is ideal to either wait until
your transmitter is back to working order before
emitting a correction, or while holding the constant
button down, slowly turn the Rheostat Intensity Dial
while watching your dog's reaction. Do not turn the
Rheostat Intensity Dial at a rapid increase because
the collar/receiver will emit an electrical correction
based on the level of the Rheostat Intensity Dial,
which might not be correctly reflected on the LCD
screen.
Suggestion: Carry your remote close to your
body as your body's warmth can improve
operation and viewing of the LCD screen.
59