Threaded Stud, #8-32 X 1-1/4; Knurled Knobs, #8 - Emerson GEODE CF370BS00 Mode D'emploi

Table des Matières

Les langues disponibles

6.2

Lift the Ceiling Cover up to the Threaded Studs and

turn until Studs protrude through the Ceiling Cover

Holes (Figure 28).

Secure the Ceiling Cover in place by sliding a

Lockwasher over each of the Threaded Studs and

installing the two Knurled Knobs (supplied) (Figure 28).

Tighten the Knurled Knobs securely until the Ceiling

Cover fits snugly against the ceiling and the hole in the

Ceiling Cover is clear of the Downrod.

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the outlet box and

not pinched between the ceiling cover and the ceiling.

1-1/4"

THREADED

STUD (2)

#8 EXTERNAL

TOOTH

LOCKWASHER (2)

Figure 28

Please contact 1-800-654-3545 for further assistance

CEILING

COVER

#8-32 KNURLED

KNOB (2)

emersonfans.com

ETL Model No.: CF370

Table des Matières

Chapitres

Table des Matières