Emerson GEODE CF370BS00 Mode D'emploi page 6

3. Ceiling Fan Assembly
3.3
Position the Lower Housing onto the Fan Motor
Assembly Hub.
Rotate the Lower Housing Clockwise to engage the
Two loosened #6-32 x 3/8" Truss Head Screws with the
Lower Housing Key Slots (Figure 3).
3.4
Reinstall the #6-32 x 3/8" Truss Head Screw that was
previously removed (Figure 4).
Secure the Lower Housing by tightening the Three
#6-32 x 3/8" Truss Head Screws (Figure 4).
A spare #6-32 x 3/8" Truss Head Screw is supplied in
the parts bag, if needed.
NOTE: The LED Light Fixture Assembly will be
installed during the Final Assembly, after the
Ceiling Fan is Hung and Wired.
(Continued)
LOWER HOUSING
ENGAGE THE TWO LOOSENED
#6-32 x 3/8" TRUSS HEAD
SCREWS
Figure 3
REINSTALL & TIGHTEN THE
#6-32 x 3/8" TRUSS HEAD SCREW
TIGHTEN THE #6-32 x 3/8"
TRUSS HEAD SCREWS
Figure 4
6
ROTATE CLOCKWISE
ETL Model No.: CF370