Emerson GEODE CF370BS00 Mode D'emploi page 11

4.2
Securely attach the Hanger Bracket to the Outlet
Box using the Two Screws supplied with the Outlet Box
(Figure 16).
4.3
Carefully lift the Fan and seat the Hanger Ball/
Downrod Assembly on the Hanger Bracket that was
just attached to the Outlet Box (Figure 17).
Be sure the Groove in the Ball is engaged with the
Anti-Rotation Tab on the Hanger Bracket (Figure 17).
WARNING
!
Failure to seat tab in groove could cause damage to
electrical wires and possible shock or fire hazard.
WARNING
!
To avoid possible fire or shock, do not pinch wires
between the hanger ball/downrod assembly and
hanger bracket.
TWO SCREWS
SUPPLIED WITH
OUTLET BOX
Figure 16
Figure 17
Please contact 1-800-654-3545 for further assistance
11
OUTLET
BOX
HANGER
BRACKET
ANTI-ROTATION
TAB
emersonfans.com
ETL Model No.: CF370