10 #8-32 X 3/8" Pan Head Screw (Spare) - Emerson RAH ECO CF915TM60BS00 Mode D'emploi

6.4
Remove and retain one of the three #8-32 x 3/8" Pan Head
Screws in the Fan Motor Assembly.
Loosen the remaining two #8-32 x 3/8" Pan Head Screws
(Figure 24).
6.5
Orient the Lower Housing correctly to install onto the Fan
Motor Assembly, as shown.
Route the Fan Motor Assembly Wires and Terminals
through the center hole of the Lower Housing.
Rotate the Lower Housing counter-clockwise to engage
the key hole slots onto the two loosened #8-32 x 3/8" Pan
Head Screws (Figure 25).
Secure the Lower Housing by tightening the two
#8-32 x 3/8" Pan Head Screws.
Reinstall and tighten the previously removed #8-32 x 3/8"
Pan Head Screw (Figure 25).
A spare #8-32 x 3/8" Pan Head Screw is supplied in the
loose parts bag, if required.
6. Final Installation
(Continued)
Figure 24
TIGHTEN #8-32 x 3/8"
PAN HEAD SCREWS
Figure 25
15
FAN MOTOR
ASSEMBLY
LOOSEN TWO
#8-32 x 3/8" PAN
HEAD SCREWS
REMOVE ONE
#8-32 x 3/8" PAN
HEAD SCREW
LOWER
HOUSING
REINSTALL ONE
#8-32 x 3/8" PAN
HEAD SCREW
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF915