Emerson RAH ECO CF915TM60BS00 Mode D'emploi page 20

7. Wall Control Installation
SINGLE-POLE INSTALLATION
(One fan controlled by one wall control)
(See Figure 33).
HOT BLK
GROUND
NEUTRAL
Figure 33
FAN/LIGHT
BLACK
GROUND
(Continued)
!
Turning off wall switch is not sufficient. To avoid possible
electrical shock, be sure electricity is turned off at the
main fuse or circuit breaker box before wiring. All wiring
must be in accordance with National and Local codes
and the ceiling fan must be properly grounded as a
precaution against possible electrical shock.
!
Do not connect any neutral (white) wire to this control.
Incorrect wiring will damage this control.
!
Check to see that all connections are tight and that no
bare wires are visible at the wire connectors.
20
WARNING
WARNING
WARNING
U.L. Model No.: CF915