Output Module 2Ao2M12E; Pressure Measurement Module 4P4D4/4Vp4D4 - Aventics 2AI2M12-E Description Du Système Et Notice D'emploi

AVENTICS | AES I/O Modules, Analog | R412018147–BAL–001–AG
6.2.3

Output module 2AO2M12E

The output module diagnostic message consists of a diagnosis bit.
The diagnostic bit can be read as follows:
Bit = 1: An error has occurred.
Bit = 0: No error has occurred.
The diagnosis bit is sent for the following errors:
with a diagnostic message from the driver of an output channel,
– due to driver overheating,
– or overload in the "voltage output" mode,
– or wire break in the "current output" mode
6.2.4

Pressure measurement module 4P4D4/4VP4D4

The pressure measurement module diagnostic messages consist of a diagnosis bit. The diagnostic
bit can be read as follows:
Bit = 1: An error has occurred.
Bit = 0: No error has occurred.
The diagnosis bit is sent for the following errors:
If a pressure sensor is defective
Structure of the I/O Module Data
87