Mounting And Removing The Mowing Head - Stihl FSA 130 Notice D'emploi

English
2
► Push the deflector (1) into the guides on the gear housing
as far as stop.
► Insert and tighten down the screws (2).
3
► If you are using a universal deflector together with a
mowing head: Fit the skirt (3) and line limiting blade (4).
► Slide the guide slot in the skirt (3) onto the deflector (1)
– it must snap into position.
► Push the line limiting blade (4) into the slot in the skirt
(3).
► Insert and tighten down the screw (5) firmly.
6.2.2 Removing the Deflector
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
46
1
► Take out the screws (2).
► Pull off the deflector (1).
4
5
► If a skirt and line limiting blade are fitted: Remove the skirt
6.3
6.3.1
► Switch off the trimmer and pull the connecting cable plug
2
4
3
(3) and line limiting blade.
► Insert stop pin (4) into the hole in the skirt (3).
► Use the stop pin (4) to slide the skirt (3) off the deflector.
► Take out the screw (6).
► Remove the line limiting blade (5).

Mounting and Removing the Mowing Head

Mounting the Mowing Head
out of the socket.
6 Assembling the Trimmer
1
5
6
0458-726-9921-A