Mounting the Mowing Head
Preparations
:
Lay your trimmer on its back with
the loop handle pointing down and
the output shaft facing up.
FSE 60
All manuals and user guides at all-guides.com
4
2
3
STIHL Autocut 5-2
Assembling the mowing head
:
Insert spring (1) in the spool housing
(2).
All other steps are described in the
instruction sheet supplied with the head.
:
Wind the nylon line (3) onto the
spool (4).
:
Thread the ends of the nylon lines
through the sleeves and fit the spool
in the housing.
3
1
Fitting the mowing head
:
Slide the mowing head (2) over the
shaft (5) and engage hexagon
recess (7) on external hexagon (6).
:
Fit cap (8) on mowing head and
screw it clockwise onto shaft as far
as stop.
Keep instruction sheet for mowing
head in a safe place.
English
8
2
7
5
6
17