Pairing With An Android Device - TomTom Touch Manuel D'utilisation

Masquer les pouces Voir aussi pour Touch:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Pairing with an Android device

The TomTom MySports mobile app allows you to upload your activity data from your TomTom Touch
Fitness Tracker to TomTom MySports using your smartphone. It also allows automatic uploads to a
number of other websites.
Before you pair your fitness tracker with your Android device, make sure that you are using the
latest version of the TomTom MySports app and that you have the latest version of the software for
your fitness tracker installed. If a newer version of the MySports app is available, you can download
it from the Play Store. If a newer version of the software for your fitness tracker is available, you
can download it using the MySports Connect desktop app.
To pair your Android device with your fitness tracker, follow these steps:
1. Ensure that your Android device is compatible with the TomTom MySports app. You can find
information about compatible devices in Google Play.
2. Ensure you have a working internet connection on your Smartphone.
3. Your fitness tracker needs to be connected to a power source. If connecting to your computer,
wait for the MySports Connect desktop app to finish updating your device before continuing.
4. Make sure that your fitness tracker and Android device are close to each other.
5. Switch on Bluetooth in the Settings on your Android device.
6. Start the TomTom MySports mobile app on your Android device.
7. On your fitness tracker, press the button to wake up the screen, swipe the screen till you see
the Bluetooth and smartphone icons and press the button again.
8. On the Activate your device screen of your mobile app tap Band.
Your Android device shows Searching.
9. When the name of your band appears, tap on it.
10. When the name of your fitness tracker appears in the list on the Searching screen, tap on it and
accept the request to pair.
Important: Check your Android notification bar for the fitness tracker pairing request. On
some Android devices the pairing notification is shown in the Android notification bar after you
have selected the fitness tracker you want to connect. Some Android devices show a pop-up,
some don't show anything. Devices that do show a pairing request require you to accept
pairing within a few seconds.
11. In the MySports mobile app, enter the PIN code shown on your fitness tracker.
12. Once your MySports app and fitness tracker are connected tap Done.
Your fitness tracker and the MySports app are now paired. If you have trouble pairing your fitness
tracker, see below for troubleshooting instructions.
If you open the mobile app on your phone and it is trying to connect to your fitness tracker, you
may need to wake up the fitness tracker by pressing the button. To sync, pull down the Activities
screen in the app. If you experience issues syncing with the app, you can always sync your activities
using the MySports desktop app.
If you are upgrading your Android device version, you will usually have to un-pair and re-pair your
fitness tracker by following the steps below.
Troubleshooting
If you cannot connect your fitness tracker to the MySports app then it is recommended to fully
un-pair it from your Android device, then pair it again following these steps:
1. In the Bluetooth Settings menu of your Android device, un-pair or forget your fitness tracker.
Try to pair your fitness tracker again by following the pairing instructions above. If it's still not
working, continue with the troubleshooting steps below.
2. Un-install and re-install the MySports mobile app from the Play Store.
3. Restart your Android device.
17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

1ta00

Table des Matières