Dometic Waeco MagicSpeed MS880 Instructions De Montage Et De Service page 93

MagicSpeed MS880
Step 4
Press the accelerator pedal slowly as far as it will go and let it return the
same way slowly as far as the neutral position.
A constant signal sounds during this procedure.
Step 5
When steps 1 to 4 have been successfully completed:
Activate the brake.
The set values are stored permanently in the electronic module.
Teach mode will be exited.
12.4 Testing MagicSpeed (diagnosis mode)
The cruise control has a self-diagnosis mode. The self-diagnosis mode is di-
vided into three sections (modes A, B and C) and tests all components and
functions of the cruise control.
Before you start self-diagnosis, check again that all the cables are
correctly connected.
Apply the handbrake.
Shift the gear to neutral, or to neutral or park if it is automatic.
Press down the SET button on the control element and hold it.
Switch on the ignition.
An audible signal sounds as long as you hold the SET button.
Let go of the SET button.
The audible signal stops.
If you hear another signal within a second of letting go of the SET button,
a control input is activated, for example the clutch switch.
Check the cable connections to find the control input.
EN
Synchronising with an analogue connection
93